DESCRIPTION: VISTA-CURZ VOC is an emulsion of a vinyl toluene acrylate designed to provide solvent based performance from a water emulsion system. VISTA-CURZ VOC forms a moisture impermeable film that keeps moisture in the concrete. This allows the concrete to achieve complete hydration and to produce a high quality concrete.

• On new concrete as a curing compound
• On new or old concrete as a dustproofer
• To protect concrete floors and walls against alkalis, grease, fungus, salt and spalling

• Complies with VOC regulations
• Contains less then 5% solvent
• Surface remains clear
• Cures, seals and hardens in one application
• May be applied to any interior or exterior, vertical or horizontal surface
• Requires no etching of the substrate
• Eliminates the need for wet straw, wet burlap or water curing
• Improves adhesion for floor coverings or paints
• Prevents efflorescence and retards pitting and crumbling
• Increased abrasion resistance
• Very low vapor transmission rate
• Ultraviolet light resistance
• Compatible with most paints and adhesives

COVERAGE: VISTA-CURZ VOC will cover from 200 to 300 sq. ft. per gallon depending on the porosity of the substrate. A second coat of 400 to 500 sq. ft. per gallon is recommended for most applications.

PACKAGING: VISTA-CURZ VOC is packaged in 1-gallon and 5-gallon containers.

PRODUCT MIXING: VISTA-CURZ VOC is supplied as a ready to use product. Agitate the product prior to the application.

PRIMING: The use of a primer before the application of VISTA-CURZ VOC is not necessary.

STORAGE CONDITIONS: Store VISTA-CURZ VOC between 60ºF (15ºC) and 85ºF (30ºC). Do not freeze. The shelf life is one year in the original unopened container.

AS A CURING COMPOUND: Apply as soon as possible after the concrete has received its final finish, just as the water sheen disappears. If application is delayed, the concrete MUST be kept damp until VISTA-CURZ VOC is applied.

AS A DUSTPROOFER: Aged concrete must be clean, dry and free of all contaminates. Remove all dirt, grease and oil by scrubbing with and industrial cleaner or TSP. After scrubbing, flush thoroughly with clean water and allow to dry completely before coating.

APPLICATION: VISTA-CURZ VOC should be applied at an ambient temperature of 40ºF (4ºC) and rising at the time of application. Apply by low pressure sprayer with neoprene fitting, if not available use a brush or roller. The sprayer MUST be clean, dry and free of solvents. Clean sprayer between applications for best results. A uniform film should be achieved for best results. For a high surface gloss, re-coat in 24 hours.

WORKING TIME: VISTA-CURZ VOC has an unlimited working time.

CURING: VISTA-CURZ VOC must have 24 hours of drying time before accepting light foot traffic. Heavy duty traffic can be accepted after 48 hours. Maximum hardness is achieved after 7 days at ambient temperatures.

• Minimum ambient and surface temperatures must be 40ºF (4ºC) and rising at the time of application
• Do not use on white or pigmented concrete
• VISTA-CURZ VOC MUST be removed prior to cement or epoxy based overlays
• Do not dilute. This will result in reduced performance
• Tools may be cleaned up with Mineral spirits or turpentine

• Keep product from freezing
• Do not use below 40ºF (4ºC)
• Protect application areas from rain for 72 hours
• Do not wash floor for 30 days
• Not gasoline resistant
• Apply only in adequate ventilated areas
• Contains petroleum distillate and hydrocarbon solvent
• Top coat and adhesives should be tested for compatibility before proceeding with top coat or finish flooring
• Product will darken surface with application and aging
• Dispose of waste materials in accordance with Federal, State and local regulations
• The use of a NIOSH/MSA approved respirator, safety goggles and rubber gloves is recommended
• In case of eye contact, immediately flush eyes with water for 15 minutes and contact a Physician
• In case of skin contact, wash with soap and water; remove and wash clothing before reuse
• If overcome by inhalation, remove to fresh air. If not breathing, give artificial respiration (mouth to month). Give oxygen. Contact Physician
• Do not take internally. If swallowed, do not induce vomiting. Call Physician immediately
• Keep out of the reach of children
• Consult MSDS for additional information